- 1) Size: 63 mm (2.5") with 1750 lpm at 6.8 bar
- 2) Size: 75 mm (3") with 2580 lpm at 6.8 bar
- 3) Size: 100 mm (4") with 3500 lpm at 6.8 bar
- 4) Hot dip galvanized carbon steel waterway
- 5) Maximum service pressure 12 bar (175 psi)
- 6) Monitor with fixed flow solid bore nozzle
- 7) Bronze swivel joint with double row of stainless steel ball bearing
- 8) Vertical & horizontal movement by handle and manual lock
- 9) 360° continuous horizontal rotation & +90°, -45° vertical elevation
- 1) Installation and Maintenance Monitors and Nozzles size 63 mm (2.5")
- 2) Forwarding Hot dip galvanized Carbon Steel waterway and Bronze swivel joint
- 3) Double row of stainless steel ball bearing with grease fittings
- 4) Liquid filled pressure gauge optional
- 5) Fully enclosed worm gear for vertical movement and handle with twist lock for horizontal rotation
- 6) 360° continuous horizontal rotation and +90°, 45° vertical elevation
- 7) Maximum operating pressure to 12 bar (175 psi)
- 8) Flow up to 2270 lpm (600 gpm) friction loss less than 10 psi
- 9) Red polyurethane finish
- 1) Corrosion resistant Bronze construction
- 2) Model NW 500 & 700 with 3" BSP inlet
- 3) Model NW 1000 with 4" BSP inlet
- 4) Inlet connection size 3" BSP female for model NW 500 & NW 700
- Inlet connection size 4" BSP female for MODEL NW 1000
- 6) Fixed gallonage heavy duty Nozzle for use with monitors
- 7) Fix flow 1900, 2650, 3785 lpm (500, 700 & 1000 gpm)
- 8) Excellent water hydrant stream
- 1) Fixed flow gallonage heavy duty nozzle for use with monitors
- 2) Factory set for fix flow 1500 to 2850 lpm (400 to 750 gpm)
- 3) Easy pattern change under flowing condition from straight stream to wide fog
- 4) Field replaceable spinning teeth ring
- Excellent water stream used as water nozzle or non-aspirating foam nozzle
- 6) Flow set at 6.9 bar (100 psi) can be changed from 5.6 to 12 bar (80 to 175 psi), if required
- 7) 2.5" BSP swivel female inlet base
- 8) Hard anodized Aluminium or corrosion resistant Bronze material
- 1) Fixed gallonage heavy duty nozzle for use with monitor
- 2) Factory set for fixed flow, 1500 to 3030 lpm (400 to 800 gpm)
- 3) Easy pattern change under flowing condition from straight stream to wide fog
- 4) Field replaceable spinning teeth ring
- Excellent water stream used as water nozzle or non-aspirating foam nozzle
- 6) Flow set at 6.9 bar (100 psi) can be changed from 5.5 to 12 bar (80 to 175 psi), if required
- 7) 3" BSP swivel female inlet base
- 8) Hard anodized Aluminium or corrosion resistant Bronze material